Index:

Console Products

Console Control Computer (LCS systems)
The main processor of the  Classic Organ Works (Maestro) pipe organ control system.

Console Control Computer (CCC)
The main processor of the  Classic Organ Works (Legacy) pipe organ control system.

Console Control Unit (CCU)
The Console Control Unit (CCU) is contained in a metal box, which has a hinged "pin-board" front panel where most connections to console switches and stop magnets are made. Three versions are available - for three, four, or five-manual organs. 

Organ Control Unit (OCU)
This Organ Control Unit (OCU) is an "all-in-one" unit that combines the functions of both the Console Control Unit and Pipe Control Unit for a small organ. 

Bargraph Displays (BRGF)
Display the position of an expression or crescendo pedal.

Control Panels and Console LED Display Boards (CTRL, DB)
An aesthetically-pleasing solution for locating all control and special-function pistons. 

Lamp Driver Boards (LAMPDR)
Drive lamps, reversible-piston indicators, bargraph displays and much more! 

Lighted PushButton (LPB)
Add stops, tabs, and couplers to consoles where space is limited. 

Lighted Rocker Tab Board (LRT)
 These cost-effective stop controls have a positive tactile action.

Main Cable Switch Board (MCS-1)
The MCS-1 Main Cable Switch board allows up to four possible connection locations for any console with a Classic Control system inside. Routing is performed simply by plugging the console cable into the nearest one. 

MIDI In/Out Connector Modules (MIOB)
Combine technology with tradition by adding sound modules, sequencers, and MIDI equipment to your organ! 

Music Rack Control Panel (MRCP)
Fitted under the Console Music Rack, it adds displays and push-button controls to your console. 

Optical Keyswitch Boards
Update older keyboards suffering from poor switch contacts with the latest optical switching technology! 

Output Boards (OUT)
Output Boards provides packaged systems with output functionality, a number of Output modules are plugged on the inside of the pin-board face panel. 

Second Touch Board (STB-1)
Allows the Second-Touch capability present on a theatre organ, or more than 4 keyboards on a large organ, to be used. 

Shade Roller Input Board (SRIB)
An interface between the Console Control Computer and contact rollers found on swell shoes and Crescendo pedals. 

Switch Input Board (SIB)
An interface between the Classic Console Control Computer and switches wired in a parallel arrangement! 

Stop-Action (Dual Magnetic) Driver Board (SAMDB)
This board is used for each group of dual-magnetic drawknobs or stopkeys in the console.  Newest version is SAMDB-3.

Graphic Display Module (GDM-1)
The GDM-1 Graphic Display Module is a compact discrete display that may be used to provide basic information to the organist.

CCU/PCU Output Board: OUTN
This output boards is used in packaged systems to provide Negative-active outputs to drive stop action or chest magnets.

CCU/PCU Output Board: OUTP
This output boards is used in packaged systems to provide Positive-active outputs to drive stop action or chest magnets.

Graphic Display Module (GDM-2)
The GDM-1 Graphic Display Module is a compact discrete display that may be used to provide basic information to the organist.


[Top]

Go to top
Template by JoomlaShine